Rode Stereo VideoMic Camera-Mount Stereo Microphone

Rode Stereo VideoMic Camera-Mount Stereo Microphone

• Stereo condenser microphone with integrated shockmount, HPF and PAD. Designed to connect directly to consumer video cameras.

• Description

  The RØDE Stereo VideoMic is a high-quality stereo microphone designed for use with camcorders, DSLR cameras and portable audio recorders.

  Two high-resolution 1/2" condenser capsules are mounted in a fixed X/Y stereo array, providing a very natural stereo recording, while still offering a high level of rear rejection.

  The Stereo VideoMic is an ideal microphone for capturing environmental and ambient sounds, as well as live music. For dialogue and directional applications the RØDE VideoMic and VideoMic Pro are recommended.

  An in-built shock mounting system isolates the Stereo VideoMic capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.

  Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand.

  In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

  A -10dB level attenuation (or PAD), selectable from the rear face of the microphone, allows recording of loud sound sources, such as live music or motorsport.

  
  

  Specification

  Acoustic Principle	Pressure Gradient
  Active Electronics	JFET impedance converter
  Capsule	0.50"
  Polar Pattern
  Address Type	End
  Frequency Range	40Hz - 20kHz
  Output Impedance	200Ω
  Maximum SPL	134dBSPL
  Sensitivity	-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  Equivalent Noise Level (A-weighted)	20dBA
  Power Options
  Weight	288.00g
  Dimensions	65.00mmH x 102.00mmW x 170.00mmD
  Output
  Warranty	1 year with free extension to 10 years following registration here